The corrosion management plan and control MS is the one that requires some of the most integration. So, let's briefly check some of the key integration points between CM and C MS. Without doubt management requires to make sure that the right resources need to be offered for the prevention and control of corrosion. The control management specialist and engineer or other responsible party require to ensure the management Is educated every year at the right time on what resources will be required for the next budget cycle.
The IOW MS and the MOC MS are both integrated closely with the control management and C MS. The corrosion specialist and engineer are central to ensure that the MOC process identifies and analyses changes that are likely a threat to pressure equipment integrity. Often, it is the specialist and engineer that is the one who might know if the change will affect pressure equipment integrity. So that they will be involved in the MOC triggering process.
Even when the management of change is triggered if a specialist is not involved in the assessment. Ask the right question, then the management of the change process for reducing breaches of containment can be insufficient which further leads to possible breaches of containment.
A specialist must beware of the risk assessment methods to help find the right course of action when taking such problems as when they need corrosion monitoring devices, what process monitoring devices or samples might or might not be needed to track IOWs. The corrosion mitigating strategies are warranted, what material selection strategies are warranted, what linings and coating might not be needed, and various other CC decisions. So, control management and C MS are closely used with the risk assessment and corrosion management plan.
With all the other pressure equipment integrity and R MS, the Corrosion management specialist is integrated with most of the essential aspects of this Life Cycle management system. The material selection has also appeared in CM and C MS as an evident integration point, but the engineers involved in designing for specifying PMP and corrosion control to ensure the right alloys are received and fixed. Specifying equipment preservation methods are assessing materials, idle equipment issues linked with replacements and repairs.
As mentioned, there are various industry standards and codes that are related to the problems linked with control and corrosion management and are an essential source of guidance and information for the corrosion management specialist working in all ten of the PEI and R MS.
Check out Cortec- Me if you are looking for a corrosion management program. They offer you the best corrosion management strategies.
Comments