top of page
cortecmeuae

Rust Removal Solution for Tools & Rust Remover Soak

Rust becomes a common issue for most of the population. Be it for machinery in the factory, or common household items on a regular basis. It creates a problem bigger than people can imagine in lots of cases. Offshore and marine corrosion are two very common terms that we come across. Once you get the hang of rust removal, consider all your metal items secure. Rust usually forms when a metal object or surface is exposed to oxygen or water for a long span of time. It is usually very tough to remove, but with the right techniques, you can do it without a hassle.

Sanding

Sanding works like magic if you wish to remove rust easily at home, and are looking for rust removers for metals. If the object’s surface is not already clean, make sure it is. Clean it with a dry cloth before you try sanding on it.

● Remember that there should not be any grease left on the object. ● Otherwise, the sanding method won’t work for rust protection. ● Using a wire brush, you can remove the rust from the most-corroded areas first. ● This will give you a good head-start. ● For the thick and tough patches that don’t go away easily, use good sandpaper. This might require some extra effort from your end, but it will work nonetheless.


It is advisable to use grain sandpaper as it will remove the rust more efficiently. Wash the object’s surface with clear water and it will shine as new.

Oxalic acid

This is a commercial rust remover, and a very recommended one as well. However, do not try to use it without proper precautions. You will need eye protection and rubber gloves before you use it. If you have more than one rusted object in your house, this is your best bet. All you have to do is pour water in a container and then mix three tablespoons of oxalic acid into it. You have the perfect mixture ready now. Be careful for the next part as you have to dip all the rusted objects into the mixture one by one. Keep it in the mixture for about twenty minutes before you rinse the excess mixture off the objects. Let them dry for some time, and you will have brand new looking metal objects. If you are looking for good rust primers, feel free to contact Cortec-Me.

7 views0 comments

Recent Posts

See All

Comments


bottom of page